Peavey Versarray118 , Versarray112

Peavey Versarray 112 MKII Two-way

Bi-Amp Ribbon Line Source Array Loudspeaker System with 12″ Black Woofer

• ราคา 69,500 บาท

Peavey Versarray 112 MKII Two-way Bi-Amp Ribbon Line Source Array Loudspeaker System with 12″ Black Woofer
 
The Versarray 112 MKII Ribbon Driver LIne Source Array module consists of a new 12" Neo Black Widow woofer combined with a neodymium-based Peavey RD woofer combined with a neodymium-based Peavey RD 1.6 ribbon driver in a cabinet with a highly flexible rigging system. Designed to provide modular coverage of small medium venues, and intended for use with the companion Versarray Sub models, the Versarray 112 MKII offers extreme versatility and high-performance capability.
 
• Two-way Bi-Amp Ribbon Line Source Array SR System
• 12" Neo Black Widow 4" VC Woofer
• 1,000 watt program, 2000 watt peak power handling
• New Ribbon Driver with Neo magnet, 50% more power handling and 2dB more sensitivity!
• 90 Degrees H by 15 Degrees V coverage pattern (per one cabinet)
• Easy aiming angle adjustment rigging system Angle adjustable in 2 1/2 degree increments from 0 to 15 degrees, total angle betwwn adjacent cabinets
• Sound Guard tweeter protection
• Inputs are two Neutrik Speakon 4-pin jacks in parallel
• 18mm 13-ply Baltic birch enclosure
• Durable HammerHead polyurethane finish

• ราคา 86,500 บาท

118 Sub 1x18-Inch 4-Ohm Black Widow Bass Loudspeaker Cabinet
 
The SP™ 118 Sub is a perfect match as an additional low frequency enclosure for any of the SP Series enclosures. A stand mount is built into the cabinet for ease of adding a supplemental mid/ high speaker that has a matching 35 mm (1-3/8") stand adapter in its base. The recommended pole is Peavey part number 00326530.
 
Excellent sonic performance can be obtained when using a separate crossover that is designed to send frequencies above 125 Hz to the mid/highs, while at the same time sending frequencies below 125 Hz to the SP 1 18 Sub. The crossover filter slope should be a minimum of 12 dB per octave at 125 Hz, and preferably 18 dB per octave for lower crossover frequencies. For maximum versatility for the musician, there are no crossover components within the SP 1 18 Sub cabinet. The two 1/4" jacks are paralleled, one as an input and the other as a thru.
 
The SP 118 Sub enclosure is loaded with an 1801-4 Black Widow® woofer. This woofer will provide years of high reliability under the most punishing of low frequency applications.
 

• 1801-4 Black Widow® woofer
• 16-gauge plasticized grille
• Protective corners
• Integral stand mount for supplemental mid/high speaker
• Black carpet-covered cabinet
• Frequency Response, 1 Meter On-Axis, Swept-Sine in Anechoic Environment: 48 Hz to 1 kHz
• Low Frequency Cut-Off (-3 dB poin): 48 Hz
• Usable Low Frequency Limit (-10 dB point): 38 Hz
• Power Handling: 350 W continuous (37.4 V RMS); 700 W program; 1 ,400 W peak
• Sound Pressure Level, 1 Watt, 1 Meter in Anechoic Environment: 99 dB (2.0 V)
• Maximum Sound Pressure Level (1 meter): 122 dB continuous / 128 dB peak
• Radiation Angle Measured at -6 dB Point of Polar Response: Essentially omnidirectional
• Transducer Complement: One Peavey 1801-4 Black Widow®
• Box Tuning Frequency: 36 Hz
• Minimum Recommended Active Crossover Frequency and Slope for Bi-amping: 90 Hz at 18 dB/octave
• Impedance (Z): Nominal: 4 Ohm / Minimum: 4.15 Ohm
• Input Connections: 2-paralIeled 1/4" jacks
• 3/4" MDF
• 3/4" plywood black carpet covered
• Pole base
• Integral stand mount for mid/high speaker